CFE Gateway

7.18.2.0

Released: Feb 28, 2018 File Size: 0
Package Contents:
No notes available.

Important Notes

CFE Gateway 7.18.2 is released to address excessive price server logging, resulting in a performance impact as well as large logfile size.

Why Should I Upgrade?

CFE Gateway 7.18.2 is released to address excessive price server logging, resulting in a performance impact as well as large logfile size.

System Requirements

CFE Gateway 7.18.2 is released to address excessive price server logging, resulting in a performance impact as well as large logfile size.

Installation Notes

Enhancements

  1. Price Feed
    1. Reduced price server logging to alleviate performance issues, as well as reduce logfile size (Ref 234761)

Fixes

Known Issues

  1. Order Server:
    In order to configure the Order Server, customers will need to request FIX order entry sessions (Logical Ports) from the exchange.

    FIX order sessions are configured in the hostinfo.cfg as follows:
    ExchangeIP=x.x.x.x <- Provided by the exchange
    ExchangePort=xxxxx <- Provided by the exchange
    BackupIP=x.x.x.x <- Provided by the exchange
    BackupPort=xxxx <- Provided by the exchange
    SenderCompId=TTCH <- Provided by the exchange
    SenderSubId=xxxx <- Provided by the exchange
    TargetCompId=CFE <- Provided by the exchange
    Member=CFE <- Defined by customer

    In addition, customers should ensure the following is included for each order session configuration:

    # CTI / Order Capacity Mapping
    A1=11
    A2=21
    A3=20
    A4=31
    M1=21
    P1=10
    P2=30
    P3=40
    Please note that customers should configure their desired 'Allowed EFID' value in the FFT2 field in X_TRADER. This value is provided by the exchange, and multiple EFIDs may be assigned to a session, though only one may be submitted on a given order.

    Price Server:
    In order to configure the Price Server, customers will need to request both PITCH SPIN and PITCH GRP ports from the exchange.

    IMPORTANT NOTE: Please carefully review the Price Server and MulticastGroups configuration information, as all user configured information has been moved to the hostinfo.cfg file in order to avoid issues with upgrades overwriting any custom configuration in the multicastgroups.cfg file.

    The hostinfo.cfg configuration for the Price Server is as follows:
    [PriceServer]
    MulticastGroup=UNIT-1
    #SPIN creds for retransmission
    #Below field Provided by the exchange
    unit-1_spin_user_id=user ID
    #Below field Provided by the exchange
    unit-1_spin_user_password=password
    #Below field Provided by the exchange
    unit-1_spin_user_sessionsubid=session SubID
    #Below field Provided by the exchange
    unit-1_spin_server=ip:port

    #GRP creds for retransmission
    #Below field provided by the exchange
    unit-1_grp_user_id=user ID
    #Below field provided by the exchange
    unit-1_grp_user_password=password
    #Below field provided by the exchange
    unit-1_grp_user_sessionsubid=session SubID
    #Below field provided by the exchange
    unit-1_grp_server=ip:port

    MulticastGroup=UNIT-2
    #SPIN creds for retransmission
    #Below field Provided by the exchange
    unit-2_spin_user_id=user ID
    #Below field Provided by the exchange
    unit-2_spin_user_password=password
    #Below field Provided by the exchange
    unit-2_spin_user_sessionsubid=session SubID
    #Below field Provided by the exchange
    unit-2_spin_server=ip:port

    #GRP creds for retransmission
    #Below field provided by the exchange
    unit-2_grp_user_id=user ID
    #Below field provided by the exchange
    unit-2_grp_user_password=password
    #Below field provided by the exchange
    unit-2_grp_user_sessionsubid=session SubID
    #Below field provided by the exchange
    unit-2_grp_server=ip:port

    The multicastgroups.cfg configuration for the Price Server is as follows:

    Note: Please note that for this initial release, GapAddressFeedB has been commented out. B feed recovery functionality will be enabled in the next release, and this config will be automatically updated. This information will be written to the multicastgroups.cfg file on upgrade, and no manual step is needed to populate this information.

    # Do not modify below field. These are Production details for CFE PITCH
    [UNIT-1]
    # Do not modify below field
    ChannelNumber=0
    # Do not modify below field
    Exchange=CFE

    # Real Time Multicasts channel for CFE PITCH
    # Do not modify below field
    AddressFeedA=224.0.131.132:30001
    # Do not modify below field
    AddressFeedB=233.130.124.132:30001

    # Gap Multicasts channel for CFE PITCH
    # Do not modify below field
    GapAddressFeedA=224.0.131.133:30001
    # Do not modify below field
    #GapAddressFeedB=233.130.124.133:30001

    # Do not modify below field
    [UNIT-2]
    # Do not modify below field
    ChannelNumber=1
    # Do not modify below field
    Exchange=CFE

    # Real Time Multicasts channel for CFE PITCH
    # Do not modify below field
    AddressFeedA=224.0.131.132:30002
    # Do not modify below field
    AddressFeedB=233.130.124.132:30002

    # Gap Multicasts channel for CFE PITCH
    # Do not modify below field
    GapAddressFeedA=224.0.131.133:30002
    # Do not modify below field
    #GapAddressFeedB=233.130.124.133:30002