GMEX Gateway
7.18.0.5
Important Notes
TT GMEX Gateway 7.18.0 is released to support trade confirmation functionality, required by GMEX, via the Eurex T7 ETI interface.
Why Should I Upgrade?
TT GMEX Gateway 7.18.0 is released to support trade confirmation functionality, required by GMEX, via the Eurex T7 ETI interface.
NOTE: When placing trades on GMEX, the FFT2 field must be populated in X_TRADER®, but may contain an end user specified value.
NOTE: When placing trades on GMEX, the FFT2 field must be populated in X_TRADER®, but may contain an end user specified value.
System Requirements
TT GMEX Gateway 7.18.0 is released to support trade confirmation functionality, required by GMEX, via the Eurex T7 ETI interface.
NOTE: When placing trades on GMEX, the FFT2 field must be populated in X_TRADER®, but may contain an end user specified value.
NOTE: When placing trades on GMEX, the FFT2 field must be populated in X_TRADER®, but may contain an end user specified value.
Installation Notes
The TT GMEX Gateway now requires that an ETI session be configured, according to the following guidelines:
ETI Sessions are configured in the hostinfo.cfg as follows:
[ETIRouterSession_1]
Member=XXXX <----Same as Eurex ETI Configuration
BusinessUnit=XXXX <----Same as Eurex ETI Configuration
SessionId=XXXX <----Same as Eurex ETI Configuration
SessionPassword=XXXX <----Same as Eurex ETI Configuration
NetworkInterfaceFeed1=XXXX <----Same as Eurex ETI Configuration
NetworkInterfaceFeed2=XXXX <----Same as Eurex ETI Configuration
ConnectionGw1=XXXX <----Same as Eurex ETI Configuration
ConnectionGw2=XXXX <----Same as Eurex ETI Configuration
Port=XXXX <----Same as Eurex ETI Configuration
OperatorID=10953 <---- Must be a valid user ID mapping to an exchange MGT.
OperatorPassword=XXXX
#GMEXExecutingFirm=GMEX
NOTE: When placing trades on GMEX, the FFT2 field must be populated in X_TRADER®, but may contain an end user specified value.
- ETI session must be either LF or LF light
- Session must be assigned to the customer's Eurex membership and have permission to approve trades
- Operator ID must be a valid user ID mapped to an exchange MGT, must be assigned to the customer's Eurex membership, and have permission to approve trades
ETI Sessions are configured in the hostinfo.cfg as follows:
[ETIRouterSession_1]
Member=XXXX <----Same as Eurex ETI Configuration
BusinessUnit=XXXX <----Same as Eurex ETI Configuration
SessionId=XXXX <----Same as Eurex ETI Configuration
SessionPassword=XXXX <----Same as Eurex ETI Configuration
NetworkInterfaceFeed1=XXXX <----Same as Eurex ETI Configuration
NetworkInterfaceFeed2=XXXX <----Same as Eurex ETI Configuration
ConnectionGw1=XXXX <----Same as Eurex ETI Configuration
ConnectionGw2=XXXX <----Same as Eurex ETI Configuration
Port=XXXX <----Same as Eurex ETI Configuration
OperatorID=10953 <---- Must be a valid user ID mapping to an exchange MGT.
OperatorPassword=XXXX
#GMEXExecutingFirm=GMEX
NOTE: When placing trades on GMEX, the FFT2 field must be populated in X_TRADER®, but may contain an end user specified value.
Enhancements
Fixes
- Order Server
- Enabled support of trade confirmations via the Eurex T7 ETI interface. (Ref 232939)